Skip to main content

AA Alive Sdn Bhd · SSM 1204108-DEst. 2016Superbrands Malaysia 2025Batu Caves · Kota Kinabalu · Kuching

WhatsApp 010-905 2891

Ultrasound Service Contracts: What They Should Cover and What to Ask

Once the warranty ends, the service contract decides how quickly a broken machine or probe comes back, and what it costs. The kinds of contract on offer, what each clause should say — especially about probes — and the records you should receive after every visit.

Also called Ultrasound service contract, Ultrasound maintenance contract, Ultrasound machine repair

Published:

When to arrange one

The warranty is the first service contract. Plan the next one before it ends, while you can still compare offers, rather than accepting the first one after a breakdown.

  • At purchase: ask for the post-warranty service options to be quoted with the system, so the full cost of ownership is visible from the start.
  • Three months before the warranty ends: review what failed, what was repaired and how long each repair took.
  • When buying refurbished: the service offer matters more, because the original warranty has usually gone.
  • When the clinic adds a second or third machine: one contract for all of them is easier to manage, and WHO notes that larger, standardised inventories are more attractive to service providers.

Types of contract

WHO’s guide to maintenance programmes notes that service can be bought on a time-and-materials basis or over a set period at a fixed rate, from manufacturers, independent service organisations or a combination. Names vary between providers, so compare the clauses rather than the label.

TypeWhat it usually includesSuits
ComprehensivePreventive maintenance, labour, travel and parts; often probe cover and a loanerBusy clinics that cannot afford downtime or surprise bills
Preventive maintenance onlyScheduled inspections and safety tests; repairs charged separatelyNewer systems with a low risk of failure
Labour onlyEngineer time and travel; parts and probes charged as usedBuyers willing to carry the parts risk for a lower fee
Per call (time and materials)No contract; each visit and part quoted when neededLightly used systems, or as a stop-gap
Probe cover add-onRepair or replacement of failed probes, sometimes accidental damageAny practice that depends on one or two probes

Probes: the clause that matters most

Probes are the part most often damaged and among the most expensive to replace, and they are where contracts differ most.

Failure or damage

Many contracts cover a probe that fails in normal use but exclude drops, cut or crushed cables, cracked lenses and damage from incompatible disinfectants. Ask for the exclusions in writing.

Repair or replace

Ask who decides, whether repairs use the manufacturer’s parts, and whether a replacement probe is new or refurbished.

Loaner probe

Ask whether a loaner is sent while yours is away, and how quickly. Without one, every exam that needs that probe stops.

Testing at each visit

Ask whether each preventive maintenance visit includes a probe check for dead elements and for lens and cable damage.

What the contract should state

  • The system and every probe covered, by model and serial number.
  • The number of preventive maintenance visits a year and the checklist used at each: image and probe checks, electrical safety, fans and filters, software and backups.
  • Response time (when an engineer calls back) and on-site time (when they arrive) for your address, and the hours they apply to.
  • Whether parts, labour, travel and accommodation are included — important for Sabah, Sarawak and remote areas.
  • The loaner system or probe arrangement, and any uptime commitment with a remedy if it is missed.
  • Which software updates and security patches are included, and whether paid upgrades are excluded.
  • The end-of-support date for the platform, after which parts may no longer be available.
  • Who does the work — the manufacturer’s engineers, the distributor or a third party — and their training on this model.
  • The term, renewal and price review, and what happens if the provider stops representing the brand.

Records you should receive

WHO recommends a work-order history for every device, so that time, parts and costs can be reviewed over its life. Ask for a written service report after every visit and keep it with the installation report.

  • Date, engineer’s name and the work done.
  • Parts replaced, with part numbers.
  • Probe test results and any defects found.
  • Electrical safety test results, where performed.
  • Software version before and after the visit.
  • Whether the system was returned to service, and any restrictions on use.

Who may service the machine

The MDA counts installation, commissioning, service, maintenance and calibration among the supply-chain activities covered by Good Distribution Practice for Medical Devices, the quality system that licensed importers and distributors must hold. Under section 43 of Act 737 it also runs a voluntary registration scheme for technical personnel who install, test, commission and maintain medical devices.

  • Ask whether the service provider holds an MDA establishment licence if it also supplies parts or probes, and check that replacement probes are registered.
  • Ask how many engineers trained on your model cover your state.
  • For larger facilities, the Malaysian Standard MS 2058:2018 is the national code of practice for engineering maintenance management of active medical devices.

Comparing two service offers

  • Put both on one table: coverage, visits, response times, loaner, probes, software and exclusions.
  • Price the exclusions: a single dropped probe can cost more than the difference between two contracts.
  • Ask each provider for the response time to your address, in writing.
  • Read what happens at renewal, and whether the price can rise as the system ages.

Frequently asked questions

What does an ultrasound service contract cover?
It depends on the type. A comprehensive contract usually covers preventive maintenance, labour, travel and parts, while probe cover and accidental damage are often separate or excluded. Get the inclusions and exclusions in writing.
Are ultrasound probes covered by a service contract?
Often only against failure in normal use. Drops, cut cables, cracked lenses and damage from incompatible disinfectants are commonly excluded unless you add probe or accidental-damage cover.
How often should an ultrasound machine be serviced?
Follow the manufacturer’s preventive maintenance schedule, which is commonly once a year. Daily and weekly user checks of the probes, cables and image sit alongside it.
Is a third-party ultrasound service provider safe to use?
It can be, if its engineers are trained on your model, use proper parts and test equipment, give you a service report after each visit and fit only MDA-registered replacement probes.
What is a reasonable response time for an ultrasound repair?
There is no legal standard; it depends on where you are. Get the response and on-site times for your address in writing, plus a loaner if a repair will take longer.

Get a written quotation

Tell us your clinic or lab type, daily workload and location. We match suitable models and send a written quotation that states who handles delivery, installation and training, and what each costs.

010-905 2891 · Mon–Sat, 9:00 am – 6:00 pm